The Rhino® Hip Revision Stem System is designed for femoral reconstruction in revision hip arthroplasty. Based on the principle of distal diaphyseal fixation, it combines a modular design with multiple stem and proximal body configurations to accommodate femoral anatomy and a wide range of bone reconstruction scenarios.
Revision hip arthroplasty following failure of a previous implant.
Femoral reconstruction in the presence of proximal bone defects.
Correction of femoral deformities affecting hip function.
Modular design allowing multiple proximal body configurations.
Based on the principle of distal diaphyseal fixation.
Available with straight and curved stem configurations.
Longitudinal flutes providing axial and rotational stability.
Speak with our specialists, receive personalized assistance, and optimize your experience in the operating room with a solution designed for precision and confidence.
| Rhino® - Revision Stems / HRS-00-MCML-0-B - HRH-01-0000-X-B | ||
|---|---|---|
| IMPLANTS | ||
| SYSTEM CODE | HRS-00-MCML-0-B | |
| SYSTEM DESCRIPTION | REVISION NON-CEMENTED MODULAR STEMS FOR TOTAL HIP ARTHROPLASTY | |
| REF. | DESCRIPTION | QTY |
| 14046-000 | PROXIMAL COMPONENT, NON-CEMENTED MODULAR STEM, HA COVER 20 X 70 MM | 1 |
| 14047-000 | PROXIMAL COMPONENT, NON-CEMENTED MODULAR STEM, HA COVER 20 X 80 MM | 1 |
| 14048-000 | PROXIMAL COMPONENT, NON-CEMENTED MODULAR STEM, HA COVER 20 X 90 MM | 1 |
| 14049-000 | PROXIMAL COMPONENT, NON-CEMENTED MODULAR STEM, HA COVER 20 X 100 MM | 1 |
| 14050-000 | PROXIMAL COMPONENT, NON-CEMENTED MODULAR STEM, HA COVER 20 X 110 MM | 1 |
| 14051-000 | NON-CEMENTED MODULAR STRAIGHT STEM, HA COVER 14 X 120 MM | 1 |
| 14052-000 | NON-CEMENTED MODULAR STRAIGHT STEM, HA COVER 15 X 120 MM | 1 |
| 14053-000 | NON-CEMENTED MODULAR STRAIGHT STEM, HA COVER 16 X 120 MM | 1 |
| 14054-000 | NON-CEMENTED MODULAR STRAIGHT STEM, HA COVER 17 X 120 MM | 1 |
| 14055-000 | NON-CEMENTED MODULAR STRAIGHT STEM, HA COVER 18 X 120 MM | 1 |
| 14056-000 | NON-CEMENTED MODULAR CURVED STEM, HA COVER 14 X 170 MM | 1 |
| 14057-000 | NON-CEMENTED MODULAR CURVED STEM, HA COVER 15 X 170 MM | 1 |
| 14058-000 | NON-CEMENTED MODULAR CURVED STEM, HA COVER 16 X 170 MM | 1 |
| 14059-000 | NON-CEMENTED MODULAR CURVED STEM, HA COVER 17 X 170 MM | 1 |
| 14060-000 | NON-CEMENTED MODULAR CURVED STEM, HA COVER 18 X 170 MM | 1 |
| SYSTEM CODE | HRH-01-0000-X-B | |
| SYSTEM DESCRIPTION | FEMORAL HEADS | |
| REF. | DESCRIPTION | QTY |
| 2597-000 | FEMORAL HEAD, SMALL, 22 MM | 1 |
| 2598-000 | FEMORAL HEAD, MEDIUM, 22 MM | 1 |
| 12154-000 | FEMORAL HEAD, SMALL, 28 MM | 1 |
| 12155-000 | FEMORAL HEAD, MEDIUM, 28 MM | 1 |
| 12156-000 | FEMORAL HEAD, LARGE, 28 MM | 1 |
| 12125-000 | FEMORAL HEAD, EXTRA LARGE 28 MM | 1 |
| 12157-000 | FEMORAL HEAD, SMALL, 32 MM | 1 |
| 12158-000 | FEMORAL HEAD, MEDIUM, 32 MM | 1 |
| 12159-000 | FEMORAL HEAD, LARGE, 32 MM | 1 |
| 12126-000 | FEMORAL HEAD, EXTRA LARGE 32 MM | 1 |
| 12127-000 | FEMORAL HEAD, SMALL, 36 MM | 1 |
| 12128-000 | FEMORAL HEAD, MEDIUM, 36 MM | 1 |
| 12129-000 | FEMORAL HEAD, LARGE, 36 MM | 1 |
| 12130-000 | FEMORAL HEAD, EXTRA LARGE 36 MM | 1 |
| ASSOCIATED INSTRUMENTS | ||
| SYSTEM CODE | HRP-00-REV1-0-T | |
| SYSTEM DESCRIPTION | INSTRUMENTS FOR REVISION STEM 1 | |
| REF. | DESCRIPTION | QTY |
| 12007-000 | L-SHAPED HANDLE FOR LOCKING SCREW PLACEMENT | 1 |
| 12305-000 | PROXIMAL COMPONENT COMPACTOR | 1 |
| 8583-000 | PLACEMENT GUIDE FOR LOCKING SCREW | 1 |
| 8596-000 | GLENA DRILL BIT GUIDE | 1 |
| 10699-000 | TORQUE WRENCH FOR HRP SYSTEM | 1 |
| 12306-000 | TUNING FORK FOR EXTRACTION | 1 |
| 10255-000 | SET SCREW SCREWDRIVER | 1 |
| 8445-000 | CANNULATED AWL FOR STARTER DRILL BIT | 1 |
| 12008-000 | CLAMPING HANDLE FOR MODULAR STEM | 1 |
| 8785-000 | PROXIMAL DRILL BIT 17 MM | 1 |
| 8786-000 | PROXIMAL DRILL BIT 20 MM | 1 |
| 8787-000 | PROXIMAL DRILL BIT 23 MM | 1 |
| 8788-000 | STARTER DRILL BIT FOR FEMORAL BOLT | 1 |
| 6063-000 | TORX WRENCH FOR PROXIMAL COMPONENT TRIAL | 1 |
| 8584-000 | THREADED GUIDE FOR PROXIMAL DRILL BIT | 1 |
| 10250-000 | ORTHONOMIC T-HANDLE | 1 |
| 8789-000 | RIGID BUR FOR FEMORAL STEM 12 MM | 1 |
| 8790-000 | RIGID BUR FOR FEMORAL STEM 13 MM | 1 |
| 8791-000 | RIGID BUR FOR FEMORAL STEM 14 MM | 1 |
| 8792-000 | RIGID BUR FOR FEMORAL STEM 15 MM | 1 |
| 8793-000 | RIGID BUR FOR FEMORAL STEM 16 MM | 1 |
| 8794-000 | RIGID BUR FOR FEMORAL STEM 17 MM | 1 |
| 8795-000 | RIGID BUR FOR FEMORAL STEM 18 MM | 1 |
| 8796-000 | RIGID BUR FOR FEMORAL STEM 19 MM | 1 |
| 8797-000 | RIGID BUR FOR FEMORAL STEM 20 MM | 1 |
| 8798-000 | RIGID BUR FOR FEMORAL STEM 21 MM | 1 |
| 8799-000 | RIGID BUR FOR FEMORAL STEM 22 MM | 1 |
| 12400-000 | RIGID BUR FOR FEMORAL STEM 23 MM | 1 |
| 12401-000 | RIGID BUR FOR FEMORAL STEM 24 MM | 1 |
| 10259-000 | HEX SCREWDRIVER 2.5 MM FOR LOCKING SCREW | 1 |
| SYSTEM CODE | HRP-00-REV2-0-T | |
| SYSTEM DESCRIPTION | INSTRUMENTS FOR REVISION STEM 2 | |
| REF. | DESCRIPTION | QTY |
| 12402-000 | CANNULATED FLEXIBLE DRILL BIT FOR FEMORAL STEM 16 MM | 1 |
| 12403-000 | CANNULATED FLEXIBLE DRILL BIT FOR FEMORAL STEM 17 MM | 1 |
| 12404-000 | CANNULATED FLEXIBLE DRILL BIT FOR FEMORAL STEM 18 MM | 1 |
| 12405-000 | CANNULATED FLEXIBLE DRILL BIT FOR FEMORAL STEM 19 MM | 1 |
| 12406-000 | CANNULATED FLEXIBLE DRILL BIT FOR FEMORAL STEM 20 MM | 1 |
| 12407-000 | CANNULATED FLEXIBLE DRILL BIT FOR FEMORAL STEM 21 MM | 1 |
| 12408-000 | CANNULATED FLEXIBLE DRILL BIT FOR FEMORAL STEM 22 MM | 1 |
| 12409-000 | CANNULATED FLEXIBLE DRILL BIT FOR FEMORAL STEM 23 MM | 1 |
| 12410-000 | CANNULATED FLEXIBLE DRILL BIT FOR FEMORAL STEM 24 MM | 1 |
| 12411-000 | CANNULATED FLEXIBLE DRILL BIT FOR FEMORAL STEM 25 MM | 1 |
| 12412-000 | CANNULATED FLEXIBLE DRILL BIT FOR FEMORAL STEM 26 MM | 1 |
| 12413-000 | CANNULATED FLEXIBLE DRILL BIT FOR FEMORAL STEM 27 MM | 1 |
| 12414-000 | CANNULATED FLEXIBLE DRILL BIT FOR FEMORAL STEM 28 MM | 1 |
| 10649-000 | TRIAL STANDARD OFFSET PROXIMAL COMPONENT 20 X 70 MM | 1 |
| 10650-000 | TRIAL STANDARD OFFSET PROXIMAL COMPONENT 20 X 80 MM | 1 |
| 10651-000 | TRIAL STANDARD OFFSET PROXIMAL COMPONENT 20 X 90 MM | 1 |
| 10652-000 | TRIAL STANDARD OFFSET PROXIMAL COMPONENT 20 X 100 MM | 1 |
| 10653-000 | TRIAL STANDARD OFFSET PROXIMAL COMPONENT 20 X 110 MM | 1 |
| 8591-070 | CLAMPING BOLT FOR PROXIMAL COMPONENT TRIAL 70 MM | 1 |
| 8591-080 | CLAMPING BOLT FOR PROXIMAL COMPONENT TRIAL 80 MM | 1 |
| 8591-090 | CLAMPING BOLT FOR PROXIMAL COMPONENT TRIAL 90 MM | 1 |
| 8591-100 | CLAMPING BOLT FOR PROXIMAL COMPONENT TRIAL 100 MM | 1 |
| 8591-110 | CLAMPING BOLT FOR PROXIMAL COMPONENT TRIAL 110 MM | 1 |
| 12120-000 | COMPRESSION MODULE FOR PROXIMAL COMPONENT TRIAL 70 MM | 1 |
| 12121-000 | COMPRESSION MODULE FOR PROXIMAL COMPONENT TRIAL 80 MM | 1 |
| 12122-000 | COMPRESSION MODULE FOR PROXIMAL COMPONENT TRIAL 90 MM | 1 |
| 12123-000 | COMPRESSION MODULE FOR PROXIMAL COMPONENT TRIAL 100 MM | 1 |
| 12124-000 | COMPRESSION MODULE FOR PROXIMAL COMPONENT TRIAL 110 MM | 1 |
| 8585-000 | CANNULATED FLEXIBLE DRILL BIT GUIDE | 1 |
| PM-2022-16 / PM-2022-53 / PM-2022-112 | ||
