A modular system for graft preparation and tensioning in ligament reconstruction surgery, designed to integrate the different stages of the procedure into a single platform. It supports drilling, suturing, graft pretensioning, and fixation construct assembly, enabling precise graft handling and careful tissue manipulation.
Preparation and tensioning of autografts and allografts for ligament reconstruction.
Integrates four stages into a single platform: drilling, suturing, graft pretensioning, and fixation construct assembly.
Allows simultaneous preparation and tensioning of two grafts, facilitating procedures that require multiple grafts.
Removable modular graft sizing block for graft diameters ranging from 3.0 to 13.0 mm, allowing accurate diameter assessment during graft preparation.
Includes a dedicated guide for the preparation of bone–patellar tendon–bone (BPTB) grafts.
Speak with our specialists, receive personalized assistance, and optimize your experience in the operating room with a solution designed for precision and confidence.
| Graft preparation table / 0LC-04-TABL-0-O | ||
|---|---|---|
| ASSOCIATED INSTRUMENTS | ||
| SYSTEM CODE | 0LC-04-TABL-0-O | |
| SYSTEM DESCRIPTION | GRAFT PREPARATION TABLE 2 | |
| REF. | DESCRIPTION | QTY |
| 10807-000 | GRAFT PREPARATION TABLE #2 | 1 |
| 10811-000 | STAR KNOB SCREW M5 X 0.8 FOR GRAFT PREPARATION TABLE #2 | 2 |
| 13300-000 | GRAFT GAUGE #3 | 1 |
| 12197-000 | TISSUE HOLDING CLIP | 3 |
| 12338-000 | TISSUE HOLDING HOOK | 1 |
| 12777-000 | DRILL GUIDE FOR GRAFT PREPARATION | 1 |
| 13046-000 | STOP DRILL BIT FOR GRAFT PREPARATION TABLE 2.0 mm | 1 |
| OPTIONALS | ||
| REF. | DESCRIPTION | |
| 0LC-04-0000-0-O | INSTRUMENTS FOR ACL/LCP | |
| 8991-000 | POSTERIOR CRUCIATE LIGAMENT TIBIAL POSITIONER | 1 |
| 8992-000 | POSTERIOR CRUCIATE LIGAMENT FEMORAL POSITIONER | 1 |
| 8993-000 | ANTERIOR CRUCIATE LIGAMENT TIBIAL POSITIONER, ELBOW TYPE | 1 |
| 8994-000 | ANTERIOR CRUCIATE LIGAMENT TIBIAL POSITIONER | 1 |
| 12339-000 | CANUTO OUT-IN FEMORAL POSITIONER | 1 |
| 12752-000 | CRUCIATE LIGAMENT GUIDE BODY | 1 |
| 12753-000 | CRUCIATE LIGAMENT GUIDE BUSHING 2.5 mm | 1 |
| 12784-000 | METAL HEMI-CANNULA 3.5 mm | 1 |
| 6895-000 | FEMORAL CANNULATED DRILL 6.0 mm | 1 |
| 5620-000 | FEMORAL CANNULATED DRILL 7.0 MM | 1 |
| 5621-000 | FEMORAL CANNULATED DRILL 8.0 MM | 1 |
| 5622-000 | FEMORAL CANNULATED DRILL 9.0 MM | 1 |
| 5623-000 | FEMORAL CANNULATED DRILL 10.0 MM | 1 |
| 6883-000 | FEMORAL CANNULATED DRILL 11.0 mm | 1 |
| 6884-000 | FEMORAL CANNULATED DRILL 12.0 mm | 1 |
| 13023-000 | CANNULATED TIBIAL DRILL 5.0 mm | 1 |
| 13024-000 | CANNULATED TIBIAL DRILL 6.0 mm | 1 |
| 13025-000 | CANNULATED TIBIAL DRILL 7.0 mm | 1 |
| 13026-000 | CANNULATED TIBIAL DRILL 8.0 mm | 1 |
| 13027-000 | CANNULATED TIBIAL DRILL 9.0 mm | 1 |
| 13028-000 | CANNULATED TIBIAL DRILL 10.0 mm | 1 |
| 13029-000 | CANNULATED TIBIAL DRILL 11.0 mm | 1 |
| 6551-000 | BUTTON CANNULATED DRILL BIT FOR LIGAMENT | 1 |
| 5040-000 | SUTURE RETRIEVER HOOK | 1 |
| 2443-000 | STEINMANN PIN 2.4 mm X 230 mm | 2 |
| 6732-000 | NITINOL WIRE FOR INTERFERENCE 1.1 mm | 2 |
| 0319-400 | STEINMANN PIN 2.5 mm X 400 mm, STAINLESS STEEL | 2 |
| 0356-440 | TENDON PASSING DRILL 2.5 X 440 mm WITH CLOSED EYELET | 4 |
| 5624-020 | STRIPPER 5 mm | 1 |
| 5626-020 | STRIPPER 7 mm | 1 |
| 13059-020 | STRIPPER 9 mm | 1 |
| 5105-000 | STAPLE IMPACTOR | 1 |
| 13300-000 | GRAFT GAUGE #3 | 1 |
| 5816-000 | PIN HOLDER | 1 |
| 6201-030 | MALLET #2 | 1 |
| 5655-000 | LARGE STRAIGHT OSTEOTOME | 1 |
| 5657-000 | LARGE CURVED OSTEOTOME | 1 |
| 7658-000 | FRONT SUTURE CUTTER | 1 |
| 5418-020 | TRANSTIBIAL GUIDE 5.0 mm | 1 |
| 5419-020 | TRANSTIBIAL GUIDE 6.0 mm | 1 |
| 5420-020 | TRANSTIBIAL GUIDE 7.0 mm | 1 |
| 6472-020 | TRANSTIBIAL GUIDE, 4.0 mm 30° | 1 |
| 6473-020 | TRANSTIBIAL GUIDE, 6.0 mm 30° | 1 |
| 6475-020 | TRANSTIBIAL GUIDE, 8.0 mm 30° | 1 |
| 5001-000 | TUNNEL GAUGE 130 mm | 1 |
| 6887-020 | CURETTE 6,00 mm ACL | 1 |
| 6579-000 | CURETTE FOR POSTERIOR LIGAMENT | 1 |
| 6495-000 | POSTERIOR PROTECTOR FOR LIGAMENT | 1 |
| 5619-020 | ANTERIOR LIGAMENT RASP | 1 |
| 7736-000 | INTERFERENCE SCREW TAP 6.5-7.0 mm | 1 |
| 7737-000 | INTERFERENCE SCREW TAP 8.0 mm | 1 |
| 7738-000 | INTERFERENCE SCREW TAP 9.0 mm | 1 |
| 7739-000 | INTERFERENCE SCREW TAP 10.0 mm | 1 |
| 7740-000 | INTERFERENCE SCREW TAP 11.0 mm | 1 |
| 7741-000 | INTERFERENCE SCREW TAP 12.0 mm | 1 |
| 12590-000 | QUICK-CONNECT DILATOR 7 mm | 1 |
| 12591-000 | QUICK-CONNECT DILATOR 8 mm | 1 |
| 12592-000 | QUICK-CONNECT DILATOR 9 mm | 1 |
| 12593-000 | QUICK-CONNECT DILATOR 10 mm | 1 |
| 12594-000 | QUICK-CONNECT DILATOR 11 mm | 1 |
| 12595-000 | QUICK-CONNECT DILATOR 12 mm | 1 |
| 12021-000 | QUICK-CONNECT HANDLE, CRICKET-TYPE | 2 |
| 12022-000 | T-HANDLE FOR DILATORS | 1 |
| 10271-000 | QUICK-CONNECT CANNULATED SCREWDRIVER FOR INTERFERENCE SCREW (TI) | 2 |
| 10272-000 | QUICK-CONNECT CANNULATED SCREWDRIVER FOR INTERFERENCE SCREW (PEEK) | 2 |
| 10273-000 | QUICK-CONNECT CANNULATED SCREWDRIVER FOR MALIBU SCREW | 2 |
| 13074-000 | QUADRICEPS TENDON STRIPPER | 1 |
| PM-2022-53 | ||
